Recommended for cassette feeding in most high-speed color laser copiers
Printing Instructions
  • Reverse (flip or mirror) the image before printing.
  • Fan sheets of paper on all four sides to reduce static charge.
  • Load transfer paper so blank side receives image. Consult copier's manufacturer's directions for more information.
Preparing to Transfer
  • Preheat heat press to 375°F/190°C.
  • Trim away any unprinted paper, leaving 1/8" border around image.
  • Choose white or light-colored substrate made of 100% cotton, cotton/poly blend, or 100% polyester.
Transferring with Commercial Heat Press
  • Place wrinkle-free garment on press pad.
  • Place transfer on garment, image side down.
  • Press at 375°F/190°C with high pressure for 15 seconds.
  • Remover from heat and peel transfer immediately.
Washing Instructions
  • Wash garment seperately (first time only). Turn inside out.
  • Machine wash cold with color-safe detergent. No bleach.
  • Remove promptly from washer to prevent bleeding. If bleeding occurs, rewash immediately.
  • Tumble dry with low heat. Add towels to facilitate drying.
  • If garment needs ironing, do not iron directly on transfer.
Storage and Handling
  • For best results, store paper in your location for 12-24 hours prior to use.
  • Store unopened in cool, dry place.
  • After opening, store unused paper in resealable poly bags.
TransferWear Brilliant is recommended for use in the following:
  • Canon CLC 350
  • Canon CLC 550
  • Canon CLC 800
  • Canon CLC 950
  • Canon CLC 1120
  • Canon CLC 2400
  • Xerox Docucolor 12
  • Xerox Docucolor 40
  • Xerox 5765 Majestik
  • Indigo Digital Presses
  • Canon CLC 500
  • Canon CLC 700
  • Canon CLC 900
  • Canon CLC 1000
  • Canon CLC 1150
  • Canon CLC 5000
  • Xerox Docucolor 30 Pro
  • Xerox Docucolor 5750
  • REGAL 5790

Helpful Tips:

  • Room temperature should be about 75°F. Allow paper to
    acclimate 12-24 hours prior to use.
  • Determine the grain direction of your paper. If 8.5 " x 11" paper was purchased, it is long grain and should be fed from the Letter R tray. If the paper has been cut down from 11" x 17" paper, it is now short-grain paper and should be fed from the Letter tray.
  • Use humidifier or dehumidifier to achieve 40% relative humidity.
  • Color laser copiers should be checked every 30,000 copies.
  • Copiers should run on their own circuit.
  • Empty toner waste boxes at least once a year.
  • Poor color after adjustment may mean starter should be replaced.
  • TransferWear premium requires less toner than ordiary paper.
  • Toners darken with heat--transfer image should be light.
  • Clean glass on color laser copiers often.
  • After every 50 transfers, use a sheet of laser cleaning paper.
  • Do not store transfer paper in copier tray, but it should be stored in same area and conditions.

Important Notes:

Printer & Copier Inks
CMW, Inc. offers papers for inkjet, laser, thermal wax and sublimation printers and copiers. In all cases, our papers are optimized to perform with OEM inks and toners. CMW does not warrant use of aftermarket inks and toners, and cannot guarantee satisfactory results. We recommend that you test any non-OEM inks or toners prior to use. Please visit our knowledge base at www.cmwi.com for more information.

Product Quality Assurance
CMW, Inc. conducts exhaustive testing on all its products, using
many types of substrates, printers, copiers, heat presses, irons,
and laundry detergents. However, it is impossible to duplicate
all printing and transfer processes, so we recommend testing
your chosen paper to determine its suitability to your needs
and equipment. Please visit our knowledge base at
www.cmwi.com for more information.
 
CMW, Inc. ● 400 Third Ave ● Suit 214 ● Kingston,PA 18704 ● Phone: 1.866.783.4700 ● Fax: 570.714.8633 ● info@cmwi.com