- Set copier/printer settings to "heavy/card stock".
- Fan sheets of paper on all four sides to reduce static charge.
- Load transfer paper so blank side receives image. If paper
is notched, print side will be facing you when notch is in
upper right corner.
|
- Preheat heat press to 400 °F/205°C.
- Trim away any unprinted paper, leaving 1/8" border around image.
- Choose white or light-colored substrate made of 100% cotton, cotton/poly blend, or 100% polyester.
|
- Place wrinkle-free garment on press pad.
- Place transfer on garment, image side down.
- Press at 400 °F/205°C with high pressure for 15 seconds.
- Remover from heat and peel transfer immediately.
|
- Wash garment seperately (first time only). Turn inside out.
- Machine wash cold with color-safe detergent. No bleach.
- Remove promptly from washer to prevent bleeding. If
bleeding occurs, rewash immediately.
- Tumble dry with low heat. Add towels to facilitate drying.
- If garment needs ironing, do not iron directly on transfer.
|
- For best results, store paper in your location for 12-24 hours prior to use.
- Store unopened in cool, dry place.
- After opening, store unused paper in resealable poly bags.
|
|
|
TransferWear CLP is recommended for use in the following:
- HP® 4500
- HP® 4550
- HP® 8500
- HP® 8550
- Canon® Image Class 2100
Helpful Tips:
- Room temperature should be about 75°F. Allow paper to
acclimate 12-24 hours prior to use.
- Determine the grain direction of your paper. If 8.5 " x 11" paper was purchased, it is long grain and should be fed from the Letter R tray. If the paper has been cut down from 11" x 17" paper, it is now short-grain paper and should be fed from the Letter tray.
- Use humidifier or dehumidifier to achieve 40% relative humidity.
Important Notes:
Printer & Copier Inks
CMW, Inc. offers papers for inkjet, laser, thermal wax and sublimation printers and copiers. In all cases, our papers are optimized to perform with OEM inks and toners. CMW does not warrant use of aftermarket inks and toners, and cannot guarantee satisfactory results. We recommend that you test any non-OEM inks or toners prior to use. Please visit our knowledge base at www.cmwi.com for more information.
Product Quality Assurance
CMW, Inc. conducts exhaustive testing on all its products, using
many types of substrates, printers, copiers, heat presses, irons,
and laundry detergents. However, it is impossible to duplicate
all printing and transfer processes, so we recommend testing
your chosen paper to determine its suitability to your needs
and equipment. Please visit our knowledge base at
www.cmwi.com for more information. |
| |
|
