You Will Need:
  • JetWear™ Darkl iron-on transfer paper
  • Cotton or cotton/poly blend garment (Dark or Bright colored)
  • Large pillowcase
  • Hand iron or Commercial Heat Press
  • Smooth, hard, heat-resistant surface
1. Printing Your Transfer
  • Insert a single sheet of transfer paper into the printer with the printable surface loaded correctly for your printer. (See your printer manual if necessary.)
  • Print Image. Do Not mirror or flip image prior to printing.
2. Peeling Away Paper Backing
  • Holding image side of transfer toward you, make a small 1/4-inch hard crease on a corner.
  • Flip the transfer over and crease the corner in the
    opposite direction.
  • Gently tear the paper backing along the crease to separate the transfer from the paper backing. Do not tear the transfer layer.
3. Trimming Your Transfer
  • After tearing the corner, separate the layers and slowly peel the transfer just past the image.
  • Stop there and replace the paper backing over the image.
  • Trim around the image.After trimming, gently peel the entire backing away from the image.
4a. Using A Heat Press (Commercial Use)
  • Place garment on press pad. Center transfer on
    garment (face up).
  • Press at 375°F/190°C with high pressure for 15 seconds.
  • Peel away parchment sheet when cool (at least 2 minutes).
4b. Hand-Ironing Your Transfer
  • Preheat iron for 5 minutes on hottest setting. Do not use steam setting!
  • For proper pressure, use an ironing surface that is waist- level or lower. Do not use ironing board, glass, concrete, granite, or any soft or heat-sensitive surface!
  • Fold the pillowcase in half and place it on the ironing surface with the open end hanging over the edge. Iron pillowcase to remove any wrinkles.
  • Place garment over the center of the pillowcase. Iron the garment to remove any wrinkles.
  • Center the transfer paper--image side up--on garment.
  • Place parchment sheet over transfer, covering completely.
5. Hand-Ironing Technique
  • Step A: Holding the iron as pictured, firmly slide across transfer paper from right to left, making 4 equal passes of 20 seconds each. Be sure to pass over all edges.
  • Step B: Holding the iron as pictured, firmly slide the iron from bottom to top, making 5 passes of 20 seconds each. Be sure to pass over all edges.
  • When cool, peel away
    parchment sheet
6. Washing Instructions
  • Wash garment seperately (first time only). Turn inside out.
  • Machine wash cold with color-safe detergent. No bleach.
  • Remove promptly from washer to prevent bleeding. If bleeding occurs, rewash immediately.
  • Tumble dry with low heat. Add towels to facilitate drying.
  • If garment needs ironing, do not iron directly on transfer.

Important Notes:

Printer & Copier Inks
CMW, Inc. offers papers for inkjet, laser, thermal wax and sublimation printers and copiers. In all cases, our papers are optimized to perform with OEM inks and toners. CMW does not warrant use of aftermarket inks and toners, and cannot guarantee satisfactory results. We recommend that you test any non-OEM inks or toners prior to use. Please visit our knowledge base at www.cmwi.com for more information.

Product Quality Assurance
CMW, Inc. conducts exhaustive testing on all its products, using
many types of substrates, printers, copiers, heat presses, irons,
and laundry detergents. However, it is impossible to duplicate
all printing and transfer processes, so we recommend testing
your chosen paper to determine its suitability to your needs
and equipment. Please visit our knowledge base at
www.cmwi.com for more information.
CMW, Inc. ● 400 Third Ave ● Suit 214 ● Kingston,PA 18704 ● Phone: 1.866.783.4700 ● Fax: 570.714.8633 ● info@cmwi.com